⏱️ Classroom Tools
Eight tools a teacher reaches for every day, on one page: a countdown timer, a stopwatch, a name picker, a group maker, a noise meter, a scoreboard, dice and a work-mode sign. Press Big screen on any tool to fill the projector with it. Free, no login, no ads.
⏳ Countdown timer
⏱️ Stopwatch
🎯 Name picker
Names are saved in this browser on this device only. They are never sent anywhere. The group maker uses the same list.
👥 Group maker
🔊 Noise meter
🔒 Nothing is recorded, saved or sent. The meter only shows how loud the room is right now. It starts when you press Start, and the microphone turns off when you press Stop.
Turn sensitivity down if normal talking already shows Too loud, or up in a big room.
🏆 Scoreboard
Click a team name to rename it. Scores and names stay in this browser only.
🎲 Dice roller
🚦 Work-mode sign
How each tool helps in class
Countdown timer
A visible countdown answers “How long do we have?” before anyone asks. The ring and the bar shrink as time runs out, so students who cannot yet read a clock can still see how much is left. Use the 1-minute preset for clean-up, 2 minutes for a turn-and-talk, 5 for a quick write and 10 for a work block. Press +1 min when a task needs a little longer, and untick End chime when you want a silent finish.
Stopwatch
Use it when you want to measure time, not limit it: how long a line-up takes, how long a science sample takes to melt, or a student’s own reading time on a fluency passage. Lap marks several times without stopping.
Name picker
Paste your class list once and it stays on this device. With “Remove picked names” ticked, every student is called on once before anyone is called twice, which keeps cold-calling fair and lets you show the class that it is fair.
Group maker
Choose “Groups of” when the task needs a set size (pairs, groups of 4), or “Number of groups” when you have a set number of stations. Groups are shuffled each time and sizes never differ by more than one person. Make groups again if you need to separate two students.
Noise meter
The bar gives students a shared, neutral picture of the room’s volume, so the conversation is about the meter rather than about one child. Set the sensitivity with the class talking at the level you want; that level should sit in the yellow OK band.
Scoreboard
Two to six teams, big numbers, and a minus button for mistakes. Rename teams by clicking the name. It works for review games, table points, or tracking how many problems each group has checked.
Dice roller
One to six dice with a running total. Roll two dice for addition facts, three for a “make the biggest number” place-value game, or one die to choose which question a team answers.
Work-mode sign
The sign tells the class how to talk during this part of the lesson: silent, whisper, with a partner, or with a group. Changing the sign is quicker than repeating the rule, and students can check it themselves.
Classroom routines to try
Turn and talk (3 minutes)
Set the sign to Partner and the timer to 2 minutes. Pose the question, press Start, and let pairs talk. When the chime sounds, switch the sign to Silent and use the name picker to choose two pairs to share.
Clean-up countdown
Put the timer on Big screen with the 1-minute preset. Students know the job is done when the ring is empty. If the room is still busy, add a minute out loud rather than starting again, so the count never goes backwards.
Fair call-on for review
Before a review game, make groups of 4, then load the scoreboard with that many teams. Ask a question, give 30 seconds of Group talk, then pick a name. If that student answers for the team, award a point.
Independent work block
Set the sign to Whisper, start a 10-minute timer and the noise meter side by side. If the meter stays out of the red for the whole block, the class earns a point on the scoreboard. Keep the goal in the class’s reach, then raise it.
Dice warm-up
Roll 2 dice on the big screen. Younger students add them; older students multiply them, or make a two-digit number and round it to the nearest ten. Roll again when everyone has an answer on a whiteboard.
Good to know
- Every tool keeps running while you work in another one. Big screen shows one tool at a time without stopping the others.
- Press Escape or Exit big screen to come back to all the tools.
- The noise meter needs you to allow the microphone. If you block it, every other tool still works.
- Add ?classroom=true to the page address to hide the site menu and footer.
Frequently asked questions
Does the noise meter record my class?
No. The noise meter only measures how loud the room is at this moment and moves the bar. Nothing is recorded, saved or sent anywhere. It starts only when you press Start and the microphone turns off when you press Stop or close the page.
Where are my students' names saved?
Names you type into the name picker are kept in this browser on this device only, so they are still there tomorrow. They are never sent to SmartOnlineGames or anyone else. Press Clear names to remove them, or use a private window if you share the computer.
Why didn't the timer chime play?
Check that the End chime box is ticked and that the device and projector volume are turned up. Browsers only allow sound after someone presses a button on the page, so the chime is set up when you press Start.
How do I show one tool on the projector?
Press Big screen on any tool. That tool fills the whole window with larger numbers and buttons. Press Exit big screen or the Escape key to go back to all the tools.
Do I need an account or an internet connection?
No account is needed and there are no ads. You need the internet to open the page; after that the tools run in your browser.